PEROGIE REPRODUCTION PARTS
Below are a list of our current available reproduction
pieces
1971-73
Mustang/Cougar
Console Clock Lens
NEW TOP QUALITY REPRODUCTION CLEAR LENS FOR THE CONSOLE MOUNTED
1971-3 MUSTANG AND COUGAR CLOCKS
$49.99/Ea
CONCOURSE CORRECT REPRODUCTION WITH
CORRECT RED FINISH
EXACT TO ORIGINAL FORD
C8OZ-7583-A SPECIFICATIONS
$14.99/Ea
FAIRLANE CLUTCH Z-BAR ENGINE
SIDE BRACKET
NEW EXACT REPRODUCTION FOR 1967 1968 1969 (ALSO FITS 1966, SLIGHTLY DIFFERENT
CURVES)
FITS
1966-69 FAIRLANE TORINO RANCHERO 390 428CJ
1966-69 MERCURY CYCLONE COMET MONTEGO 390 428CJ
PART NUMBER C7OZ 7A572A
$84.99/Ea
1967 1968 MUSTANG COUGAR EQUALIZER BAR ASSIST SPRING BRACKET
FORD PART # C7ZZ-7542A
THIS BRACKET ATTACHES TO THE (2) STUDS ON THE
FIREWALL THAT HOLD THE PARKING BRAKE ASSEMBLY. THIS BRACKET IS USED
WITH ALL ENGINE COMBINATIONS.
$34.95/Ea
1971 - 1973 FORD MUSTANG HOOD PIN RADIATOR SUPPORT BRACKETS
BRIGHT ZINC PLATED
$125.00/Pr
1965 - 1966 Mustang or Shelby
Fastback and 1967 - 1968 Mustang or Shelby Fastback Headliner
Retainer Wires. These are the wires that install the headliner
and hook from the headliner to the rear window opening. These
are made specifically for Fastback models - Most outlet houses only
stock the coupe units which are much shorter.
$14.99/Pr
1967 - 1970 Mustang
Shelby Cougar 390/427/428CJ Engine Block Plates - PROPER
Reproductions Just like the Originals
$125.00/Pr
1971-1973 Mustang Hood Pin Brackets - These are the brackets that
mount to the radiator support and hold the catch plates for the Mach
1 style hood pins
$95.00/Ea
Rimblow Inserts Aluminum
Fit 1970 - 1973 Ford Rimblow Steering Wheel Pads
$20.00/Ea
$55.00 set of 3
Rimblow Inserts Plastic
Fit 1970 - 1973 Ford Rimblow Steering Wheel Pads
$20.00/Ea
$55.00 set of 3
1970 Mach 1
Rocker Bright Trim
Proper 6 piece trim set for the rocker panel moldings on
1970 Mach 1 Mustangs. All 6 pieces are unique and
properly made to mount on your original rocker panels
$295.00/Set
Folddown Side Latches
Both 1967 - 1968 and
1969 - 1970
Mustang Fastback style in stock, Fit Fastback with Folddown rear seat
$95.00/Pr
Folddown Side Latch Knobs
- Both 1967 - 1968 and 1969 - 1970 models in stock
$10.00/Ea
Space Saver Spring
Proper for Mustang Space Saver Equipped models mounts around
canister to lock it in place. Proper Replacement
$19.95/Ea
1970-1973
Toploader Hurst Backup Switch with Clip
Fits 1970 through 1973 Toploader 4 speed applications
MUSTANG TORINO COUGAR ALL MODELS with Factory Hurst Shifter Replaces Ford
part number D0ZZ-15520-A
$125.00/Ea
Torino Shaker Plug
Fits into 1970 1971 Torino Shaker Hood Scoop Top
All Engines
$45.00/Ea
Throttle Cable Bracket Mounts
to intake manifold to hold throttle cable
APPLICATIONS:
1969 - 1970 302/351W/351C 2v or 4v
1969 390/428CJ
1969 1970 Boss 429
DOES NOT FIT 1970 428CJ
$45.00/Ea
BOSS 302
Throttle Cable Bracket
Please order Boss 302 specifically as it is unique
$55.00/Ea
1965-67 Woodgrain Steering Wheel Horn Contacts (USA MADE)
Mounts under the wheel on 1965 - 1967 deluxe and pony woodgrain steering wheels
- Mustang Fairlane etc..
$75.00/Pr
1970-1971 Torino 429SCJ Shaker
Base Bracket
Unique to 1970 1971 Torino models with 429SCJ Shaker Base
$79.95/Ea
1970-1971
Torino 429CJ Shaker Base Bracket
$49.95/Ea
1965-1970 Mustang Folddown Catch Striker Plate
Fits 1965-70 models and almost always missing!
$34.99/Ea
428 Cobra Jet/Super Cobra Jet Power Steering Pulley:
Fits 1968 1/2 1969 1970 and GT-500 P/S Models without Air Conditioning
Proper reproduction with the
80B stamping
$250.00/Ea
1970 - 1971 Ford Torino Fairlane Ranchero 351C
$200.00
1970 - 1971 Ford Torino 429 N CODE $200.00
1970 - 1971 Ford Torino 429CJ/429SCJ $200.00
1968 1969 Ford Fairlane 428CJ/428SCJ $200.00
1967 1968 1969 Ford Fairlane Torino Ranchero 390GT
$200.00
FOR WHOLESALE INFORMATION ON ANY OF OUR PEROGIE REPRODUCTION PARTS PLEASE CONTACT STEVE AT GPerogie@aol.com. THANKS FOR YOUR INTEREST
